Products - Shandong Sizhe technology products Co., LTD

Products > PS

EPS(Fire Retardant Grade)

E. P.S. (Expandable Poly - Styrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expansion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then molded into appropriate forms suited to their application. Products made from foamed polystyrene are nearly ubiquitous, for example packing materials, insulation, and foam drink cups . F eatures l High strength, l Fast forming, l High foaming & oxygen index. Fire Retardant Grade Specification F301 F302 F303 F401 Beads Size mm 1.00-1.60 ...

Read Details

EPS(High Expansion Grade)

E. P.S. (Expandable Poly - Styrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expansion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then molded into appropriate forms suited to their application. Products made from foamed polystyrene are nearly ubiquitous, for example packing materials, insulation, and foam drink cups . F eatures l High strength, l Fast forming, l High foaming & oxygen index. High Expansion Grade Specification P301 P302 P303 P401 P501 Beads Size mm 1.00-1.60 ...

Read Details

EPS (Standard Grade)

E. P.S. (Expandable Poly - Styrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expansion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production. The gas expands under the action of heat, applied as steam, to form perfectly closed cells of EPS. These cells occupy approximately 40 times the volume of the original polystyrene bead. The EPS beads are then molded into appropriate forms suited to their application. Products made from foamed polystyrene are nearly ubiquitous, for example packing materials, insulation, and foam drink cups . F eatures l High strength, l Fast forming, l High foaming & oxygen index. Specification E301 E302 E303 E401 E501 Beads Size mm ...

Read Details

SEBS

Model Number:503T Product name:SEBS thermoplastic rubber material sinopec YH-503T Structure:L appearance:powder Styrene Content(%):33 Formaldehyde solution viscosity:2000-3000 MFR (g/10min):- Tensile strength:≥16 Shore A (/):≥70 ...

Read Details

ABS

ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses. Properties: 1.Stable shrinkage, good dimensional stability, low warpage 2.Good processability 3.Balance mechanical properties 4.Good exterior, no need to be plated, sprayed 5.Flame resistant Properties Test Method Test Condition Units Typical Values Physical Melt ...

Read Details

HIPS

Medium Impact Grade . Medium Impact Strength Low Residual Monomer, Good Heat Resistance, Base Color Stability,, Good Transparency, Easy Processing ,High Flow , High Gloss Properties ASTM method Test Condition Unit Typical Value Specific Gravity D542 --- --- 1.046 Melt Flow Index D1238 200°C,5 kg load g/10 min 4.6 Tensile Strength at Yield D638 23°C,1/8” Sample kg/cm2 300 Elongation at Break D638 23°C,1/8” Sample % 40 Izod Impact Strength D256 23°C,A method,notched1/8”×1/2”×5/2” kg/m2 9.5 Vicat Softening Temperature D1525 1 kg load,3 mm Thick ( 120°C/hr ) °C 97 ...

Read Details

GPPS

Packaging & Delivery Packaging Detail: 25kg/pp bag, 17mt/1x20FCL Delivery Detail: within 10 days after order confirmation . Specifications General purpose Polystyrene /GPPS Type:General Factory supplier fast delivery Free sample General purpose Polystyrene /GPPS Basic information on properties: Item Testing standards Test Conditions Units PG-22 PG-33 PG-80 PG-80N PG-383 PG-383M Melt flow index D-1238 200 ° C*5kg g/10min. 17.5 7.4 4.0 5.7 3.0 3.0 Softening point D-1525 1kg. ° C 87.0 94.0 97.7 97.6 105.0 ...

Read Details

Total:1 page, with 7 products