Address: 318 Jinshui Road, Licang District, Qingdao City, Shandong Province
ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses.
Properties:
1.Stable shrinkage, good dimensional stability, low warpage
2.Good processability
3.Balance mechanical properties
4.Good exterior, no need to be plated, sprayed
5.Flame resistant
| Properties | Test Method | Test Condition | Units | Typical Values |
| Physical | ||||
| Melt Flow Rate | ASTM D-1238 | 220oC, 10Kg | g/10min | - |
| Specific Gravity | ASTM D-792 | 23oC | g/cm3 | 1.03 |
| Ash | - | 800oC,30min | % | - |
| Mechanical | ||||
| Tensile Strength | ASTM D-638 | 50mm/min | MPa | 46 |
| Elongation at Break | ASTM D-638 | 50mm/min | % | 14 |
| Flexural Strength | ASTM D-790 | 2mm/min | MPa | 62 |
| Flexural Modulus | ASTM D-790 | 2mm/min | MPa | 1800 |
| Impact Strength, IZOD non-notched | ASTM D-256 | 23oC | KJ/m2 | - |
| -30oC | KJ/m2 | - | ||
| Impact Strength, IZOD notched | ASTM D-256 | 23oC | KJ/m2 | 17 |
| -30oC | KJ/m2 | - | ||
| Thermal | ||||
|
Heat Deflection Temp. |
ASTM D-648 | 1.8Mpa | oC | 93 |
| 0.45Mpa | oC | 98 | ||
| Others | ||||
| Mold Shrinkage | ASTM D-955 | 23oC | % | 0.6-0.9 |
| Flammability | UL94 | 1/16" | HB | |
Professional instruments and precise testing safeguard the quality of products.
We have cooperated with experienced shipping forwarders for many years, they arrange the shipment. No matter by express, by air or by sea, we will track the course of the goods all the way, to make sure goods arrive at you on time and in good condition.
Q1. Are youtrading company or Manufacturer ?
A: We are factory
Q2.Do you provide samples ? is it free or extra ?
A: Yes, we could offer the Less than 5 KG Free sample , but do not pay the cost of freight
Q3.About Material
A: We can customize the material according to customers' requirement.
Q4. About Color
A: We are based on customer requirements
Q5. About Quality
A: All the products must be tested strictly according to the testing procedurebefore shipment.
